top of page

Walker View 3.0 SCX

The Compact Gait Analysis Lab


Walker View 3.0 SCX

Walker View 3.0 SCX was born from TecnoBody research and allows you to fully analyze the strengths and weaknesses in the athletic gesture or simply in walking.

Not a simple treadmill, but a walking and running analysis laboratory concentrated in a single innovative product capable of returning a postural analysis report of Run Analysis and Gait Analysis for rehabilitation and sports medicine.

The immediate and objective feedback allows to improve the posture in movement, the load of the lower limbs and much more both during walking and running.

The SCX Speed Control feature applied to the Walker View system redefines the world of treadmills. Walker View 3.0 SCX, in fact, works in self-adaptive mode and is capable of recognizing the user's gesture and adapting to the rhythm of his step and stride.

The revolution in the re-education of the path in running bears the name of Walker View 3.0 SCX.

Paolo Ferrante - Altaluce - 6936.png


Feature SCX Speed Control

Thanks to the patent pending SCX Speed Control feature, on Walker View you can choose to switch from a manual control
to a total autonomous control of the belt speed.
The electronics that control the SCX feature allows Walker View to automatically recognize the user's gesture, who can
regulate the passage from a walk to a run and vice versa, change the rhythm at any time, until the belt stops completely
with his simple instinctive gesture.
With SCX Speed Control, the operator obtains even more precise reports on runners and patients undergoing stroke and
gait analysis. A unique experience is guaranteed for the user, comparable to that carried out outdoors on the road.

The control of the supports with Walker View

Only the maximum control of the dynamic posture and the support of the foot guarantee the quality of the movement and
the limitation of injuries and imbalances.
Walker View is equipped with a sensorized belt with eight load cells.
These allow the postural analysis and contribute, together with the software interface and the 3D camera, to the return of a complete report of Gait Analysis or Run Analysis, printable at the end of the test.
You will discover in real time during walking or running, how to improve posture and increase performance in a safe way.

3D camera: the heart of Walker View

The 3D camera, the heart of the system, picks up the subject that is placed in position on Walker View and performs walking or running. Thanks to it, it is possible to receive an instant and objective dynamic image of the posture during training, displayed in real time on the Full HD screen of the system. The posture of the arms during the run, the support of the feet, the bending of the front and back and the side are just some of the
postural aspects analyzed and visible in the live shooting.
Performing a test on Walker View allows you to move better, free from injuries and discover strengths and weaknesses of your support, to correct bad posture in the race and the problems arising from it.

Virtual reality and immersion with Walker View

A complete and immersive visual experience to involve athletes and patients and complete the training session, helping to focus on functional recovery. For your patient, focusing on support or completing a controlled training session will no longer be boring and demotivating. In fact, in relation to the type of exercise and protocol it is
possible to develop different types of involvement based on different stimuli and perceptions.
City, countryside, woods or mountains... Choose where to set the training. Choose Walker View for your objective and detailed movement analysis.

TecnoBody Key, your training at your fingertips

An exclusive connection between the user and the system: the TecnoBody Key allows you to save your parameters, workouts and reports, always available for constant feedback and to setup your own personalized plans.
The assessment of your strength, balance, stability and elasticity are always available because the Key is recognized by the system at any time. Through the Key you and your patient you can constantly monitor the progress of therehabilitation process and set up any changes to the physical rehabilitation program.

Gait trainer, rehabilitation of thetransit with Walker View

Motor learning, both in adults and children, exploits the principle of observation.
As the child observes the adult and simulates his movements,the patient observes himself during the rehabilitation process.
Consciousness at the cognitive level has a direct confi rmationon the coordination of one's movements and the Gait Trainer module contributes to the creation or recovery of the motor pathway.
Postural re-education takes place through an
awareness guided by continuous and immediate feedback for the patient.

The SCX Speed Control feature

In the history of treadmills, the speed factor has always been imposed on the subject by the tool, which uses a classic button to adjust the speed based on a preset rhythm.

Thanks to the feature patent pending of SCX Speed Control on Walker View, the runner or patient, subjected to the run analysis, can choose to switch from a manual speed control, with the classic "plus and minus" button, to a total autonomous control belt speed, all at the push of a button.

The electronics that control the Speed Control feature allows Walker View to automatically recognize the gesture of the subject, who can regulate the passage from a walk to a run and viceversa, change the rhythm at any time, until the tape stops completely with his simple gesture.


What does self-adaptive treadmill mean?

The Walker View 3.0 SCX treadmill adapts to the gesture of the user, whether he is a patient engaged in walking or an athlete while he’s running. This means that the user is intuitive to determine the actuation of the system, the speed of the belt and the stop, through:

  • Position detection in front of the 3D camera: In just 5 seconds the system recognizes and marks the patient or runner on the belt.

  • 3D Camera: The 3D volumetric camera is able to detect the position of the joints and any movement of the subject.

  • Sensorized base with load cells : The 8 load cells under the tape detect the subject's loads, the length and the variation of the step.

  • SENSOR FUSION: The interaction between load cells, 3D camera and software re-elaboration summarizes the information necessary to obtain a complete analysis of the step and stroke.

  • Real time bio-feedback: The Full HD 49" screen is the digital mirror in which the subject displays their image, the analysis of the gesture and the detailed report data processed by the system, everything in real time.



  • PC Control Touch-Screen 16”

  • 49 ”LCD Monitor for virtual reality and biofeedback

  • Gait Analysis through 3D Camera and Strength Platform

  • Integrated 3D camera for motion capture

  • TecnoBody Key for connection to the TecnoBody Management System

  • Dimensions: L: 2750 mm P: 900 mm A:2050 mm
  • Weight: +/- 280 kg (617 lbs)
  • Running surface: L:160 cm (63’’) P:51 cm (20’’)
  • Access height: 15,5 cm (6’’) low profi le
  • Speed range: 0-20 km/h (0-12.42 mph)
  • Incremental step: 0,2 km/h (0.12 mph)
  • Elevation: 0-15 % (8,53°)
  • Heart rate monitoring: POLAR HR
  • Pc interface: Completely programmable in terms of speed, elevation and heart rate
  • Function: The software includes the ability to work with different modules, both to perform assessments, to perform training and rehabilitation
  • Motor system: 2 KW (2.6 HP)
  • Load range: 0-150 kg (0-330 lbs)
  • Precision: 0,5 kg (17.6 oz)
  • Eletric parameters: 230 VAC, 50 hz, 15 A, dedicated line
  • Power 2,5 KW
  • Conformity: Directive 93/42/EEC - Standard EN 60601-1
  • Guarantee: 12 months

The Possibilities Are Endless

Our Partners

TMG White_4x.png
Lode White_1_4x.png
XBody White_4x.png
Vald Performance_4x.png
Swiss EMS_4x.png
XSens White_4x.png
Hocoma White_4x.png
bottom of page