top of page

ProKin 252

Assessment and Dynamic Training

Prokin 252.png

Prokin 252

Emblem of TecnoBody research and development, Prokin is the first proprioceptive-stabilometric assessment machine born from our experience, one of the most widespread systems for the rehabilitation of the lower limbs.
The technology applied to Prokin 252 sees the mechanical system and electronic stability control at 50 levels connected to the software for complete integration and maximum control of gestures.
Evaluating the balance of your patients and athletes in both the orthopedic and neurological areas during the recovery from injuries will be the easiest with Prokin 252!




The ProKin 252 platform

The self-propelled treadmill is the starting point for your patient to work on ProKin.

When the patient moves with one foot resting on the platform, the data acquisition board transfers the angular displacements
converted into electrical impulses to the PC.

The joint motion data collected in a kinesthetic trace is displayed on the monitor.

The ProKin 252 system

The stability of the mobile platform is managed by an electropneumatic system through an electronic pressure regulator,
which allows an independent stability control on the two axes of antero-posterior movement and laterally on the left and
right. Thanks to this solution the system can be easily exploited and transformed from multi axial to mono axial.

Flexibility of use and completeness of the system at the service of professionals and patients. All of this is ProKin 252, your ally to help you rebuild the correct proprioceptive sensing map and an easy-to-use system in your rehab center.

The trunk sensor

The TK Sensor Trunk Sensor is the bi-axial inclinometer that, applied to your patient's torso during the exercises performed
on ProKin, is able to detect the oscillations of the torso in every direction.

The use of the trunk sensor combined with ProKin during proprioception exercises helps you to assess if the subject has
a good peripheral control, ie the control of ankles, knees and even, without making the bust intervene to compensate for poor posture.

The configurations of ProKin 252

Thanks to the flexibility of the system, Prokin can be exploited in different ways:

Static: the stabilometry allows the patient to be evaluated in a static situation with the oscillation of the pressure center (COP) and of the area and the perimeter of the Pressure Center

Monopodal dynamic with controlled load: the monopodalic mode with controlled load (BW Control) is often used for tibiotarsal
distortions, cruciate ligaments of the knee, hip prosthesis and peripheral proprioceptive control in pathologies affecting the central nervous system.

Bipodalic dynamics: useful for a dynamic bipodalic exercise that returns a test on the management of instability by the subject

TecnoBody Key, your training at
your fingertips

An exclusive connection between the user and the system, the TecnoBody Key allows you to save your parameters, workouts
and reports, always available for constant feedback and to set up your own personalized plans.

The assessment of your strength, balance, stability and elasticity are always available because the Key is recognized by the system at any time.

Through the Key you and your patient you can constantly monitor the progress of the rehabilitation process and set up any changes to the physical rehabilitation program.

  • Display touch screen 20" with 1600x900 pixel resolutions

  • Adjustable display height

  • Static/dynamic platform with 55 cm dismeter

  • Support platform and assistance 110x110 cm, ground elevation of 23 cm

  • Trunk sensor for the posture

  • Wrapping upper supports

  • Step facilitation access

  • Trunk balance seat

  • Dimension Base: 1850 x 1200 mm x H:1800-2000 mm
    (Base: 72,83” x 47,24” H: 70.86-78.74")

  • Weight: 230 kg (507 lb)

  • Platform type: Dynamic-static

  • Use: Mono and bipodalic orthostatic and setting

  • Livels of instability: 50

  • Movement: Mono and biaxial

  • Load measurement: 150 kg (330 lb)

  • Load resolution: 100 g (0.23 oz)

  • Platform angles measurements: +/- 15 °

  • Platform angles precision: 0.5 °

  • Platform angles resolution: 0.2 °

  • Trunk sensor angles measurements: +/- 30 °

  • Trunk sensor angles precision: 0.5 °

  • Trunk sensor angles resolution: 0.1 °

  • Seat angles measurements: +/- 15 °

  • Seat angles precision: 0.5 °

  • Seat angles resolution: 0.2 °

  • Sampling frequency: 20 Hz

  • PC connection: RS232

  • Electric supply: 230 VAC, 50 Hz, 2.6 A

  • Absorbed power: 600 Watt

  • Conformity: Directive 93/42/EEC - Standard EN 60601-1

  • Guarantee: 12 months

The Possibilities Are Endless

Our Partners

TMG White_4x.png
Lode White_1_4x.png
XBody White_4x.png
Vald Performance_4x.png
Swiss EMS_4x.png
XSens White_4x.png
Hocoma White_4x.png
bottom of page